Read More
Tires Store

4 Simple Ways You Can Make Your Car Environment Friendly

The environment is the most concerning problem right now. From the government themselves to even your neighbors everyone seems to be taking some kind of steps to preserve the environment. But what step are you taking? If you are wondering what can you even do. You are just an individual. Well, every single person doing anything to preserve the environment will have a good effect. For example, are you a car owner? If you are, then you can take some steps to make your car eco-friendly. After all, cars have a major role in increasing pollution in the world.

Find Out A Good Tire Store

Buying good quality tires from a renowned tire store should be your first step to make your car eco-friendly. How are tires going to help? Well, if you buy tires that are not equipped to endure dry cold winter or harsh summer, your tires will start to wear very quickly and rot, which is not good for the environment. These rotten tires start to emit harmful gases. So, instead, find a good quality tire store and buy tires from them.

Regular Tune-Ups For Your Car

If your car is always well-maintained, it will remain eco-friendly as much as possible. It will need less gas, which in turn will create less pollution and will also operate very efficiently. Not only that, if you get regular tune-ups for your car, it will boost your gas mileage by 4 per cent.

Fix The Fuel System

You might be well aware of the components of the fuel system consisting of a fuel filter, fuel pump, fuel injectors etc. If any of them becomes faulty, it will reduce in reduced fuel efficiency. This, in turn, will become harmful for the environment. So, unless you smell fuel in the car which can mean you have a faulty system, make sure to get the fuel system checked after every 30,000 miles of driving.

Check The Emissions System

This is the most responsible part of a car for increasing pollution. If this goes bad all the greenhouse gases will start multiplying. Emission system mainly reduces the amount of exhaust fumes coming from the tailpipe. Get it checked immediately when such a situation arises.

Make sure to check every part of your car every once in a while so it doesn’t create much pollution and good quality tires from your tire store when necessary.

Read More
Tires Store

5 Things You Didn’t Know About The Rims Of Your Car Wheels

Do you want to buy a new car? You must be doing a lot of research before you decide on a particular model. There are so many features in a car that most of the time people tend to not give much thought to some of the smaller features. But every little part of a car is important and contributes something towards the safety and comfort of driving a car. Just like a tire store gives a lot of care and attention while making a tire, a lot of attention is given to rims too by the manufacturers. You might not have given any thought to the rims of your car wheels but you should know about them too.

Cleaning Your Rims Is Essential

Brake dust and metal shavings from the rotor can accumulate on your rims. These materials can damage the metal of your rims, leading to a costly replacement or expensive repair. Frequently cleaning them with a sponge and rim cleaner will help protect them and remove all of the nasty materials that choose to gather there.

Rims Can Go Bad, But They Can Be Repaired

The lifespan of a rim is entirely dependent on how carefully you drive. You should have the rims checked every so often to check for damage or extended corrosion. If a rim is bent or scratched you can go to a repair shop or get new tires from a tire store, if necessary.

The Bigger The Rims, The More Gas You Will Burn

The larger the rims, the more friction the tires will have with the ground, and the higher the amount of friction, the more energy the vehicle will need to get itself moving. This phenomenon is called rolling resistance and it is another aspect to consider before you go out and buy new rims.

Smaller Rims Are Quieter

The smaller rims make less noise when you increase your speed on the road. This is because more tire rubber rests between you and the cabin of your car. Many people prefer the look of a larger tire, but when these smaller tires provide more comfort and less noise it is better to buy those. If you want to minimize you should choose the right tire from the right tire store for your rims in terms of the type of tire rubber used and the number of tire studs.

Alloy Rims Are Better Than The Steel Ones

Alloy rim is light and made for great performance as it allows you to drive well. You will pay less for gas and your car’s suspension will thank you. Steel rims, on the other hand, might be less expensive, but they are heavier, which makes it harder to start and stop.

So, before you buy new rims or tires from a good tire store, make sure to use this knowledge about rims.

 

Read More
Cars

Things You Can Do When Your Car Overheats And To Prevent It

Overheating of the car is a very frequent problem faced by many car owners. It happens when your engine gets overheated for some reason. Your engine getting heated up is not a good thing, so much so, that it can become a life-hazard situation. Sailun tires, a good quality tire store in the Philippines is going to tell you what to do if your car overheats and how you can prevent it from happening.

Things You Can Do When Your Car Overheats

  • Stop driving, pull over safely at the side of the road, and turn off the engine.
  • Do not open the hood until the car has completely cooled or the temperature gauge has moved from hot to cool.
  • Check the coolant level which is also known as antifreeze in the radiator.
  • The radiator cap needs to cool down before you open it. Beware of any hot steam and slowly twist it off with a towel. If needed, fill to the top of the radiator with coolant. Put the radiator cap back on.
  • Check hoses for leaks. You can tell the system is still working by squeezing the hose with your hand. You will feel the pressure from the liquid in the hose. If not, you have a problem.

Things You Can Do To Prevent Overheating Of The Car

Keep Your Eye On The Car Temperature Gauge

It is located on the dashboard which has a needle that should always be pointing toward the centre. If it points toward hot, pull over, turn off the engine, and let the car cool down.

Turn On The Heat To Cool The Engine

Turning on the heat may be the last thing you want to do especially if it on a hot summer day, but it can pull hot air from the engine compartment and cool the engine. It won’t fix the main problem in the engine, but it’s a good measure for long drives.

Add Engine Coolant

This is especially important during the summer. There is an indicator line on the reservoir that shows the level of coolant. If the level is too low, simply add the appropriate amount of coolant and reattach the cap.

Consider Replacing Your Car Battery

Normally if a car battery becomes older than three it may not provide the same power as before which can, in turn, lead to overheating of the engine. Ask your mechanic whether you may need a new battery or not.

Now that you know what to do if you ever find out that your car is getting overheated when you are on the road, simply follow the steps before you start driving again. Take professional advice from your favourite tire store and try to prevent it from ever happening.

Repair or Replace
Read More
Tire Supplier

Tires To Be Repaired Or Replaced: Ask Your Van Tires Supplier

Does your tire get a lot of flats? Do you need to keep fixing them every two months? It’s quite possible to get frustrated if you have to keep fixing your tire every now and then. Your van tire supplier is here to tell you whether you need to repair your tire or replace your tire even if it’s new.

Most of the time we are required to repair a tire when it gets punctured. But whether you can repair it or you need to replace it depends on the degree of your tire puncture, where the puncture is located, and how quickly you spotted the damage. Of course, repairing the tire is always the easiest and cost-effective way option. But that shouldn’t outvote the safety of you and your passengers. First, ensure that it is okay to only repair your tire and not replace it.

The first thing you should consider when deciding whether to repair or replace your tire is to measure how long you drove on the tire before noticing and responding to the puncture. If you haven’t noticed a low or flat tire and have yet kept driving can result in severely damaged sidewalls. Not only that it can also hidden damage within the tire. The tire should be thoroughly inspected by completely dismounting it before attempting any repair. Consider replacing only if the damage is irreparable.

The size, location, and type of the puncture are the next factors you need to consider. A tire cannot be repaired if the puncture is on the sidewall or the shoulder of the tire. Also if the puncture is long and straight and large in in diameter, it can’t be repaired too.

Also, if this is not the first time you have to repair your tire then it is best to replace them. Sometimes when a tire is repaired a lot of times in a row with the help of sealant and other things, while your tire might be working good for a few months but it also means it has been worn out a lot. This can increase the risk of tire bursting too.

As a good van tire supplier would know tires are the most important as they are the only parts of a car that come in direct contact with the road. So, if you are unable to decide whether to repair them or replace them call a professional tire supplier. Safety is of highest priority. So if your tires need to be replaced then don’t think about the cost. Otherwise you will end up paying more for the hospital bills.

Sailun Tire
Read More
Tire

A Brief Introduction To The Process of Car Tire Manufacturing

In the previous blog, we gave a brief introduction to the components of a tire. In this blog, we will give you a brief introduction to the process of car tire manufacturing. A good tire supplier will always use good natural rubber or synthetic rubber during the manufacturing process. Apart from the rubber, other materials are also used. Another primary ingredient is carbon black which is a fine soft powder, created from crude oil or natural gas when burnt. Along with Sulfur other chemicals are used in tires too. Some of the chemicals, are first mixed with rubber and then heated. This produce specific tire characteristics such as high friction (but low mileage) for heavy-duty tires or high mileage (but lower friction) for a passenger car tire. So, lets take a look at it, in details.

Blend

The first step for manufacturing a tire is to mix the raw materials to form the rubber compound. At most, 30 ingredients are used for a tire’s rubber blend. The ingredient proportions depend on what type of tire is being manufactured. It’s composed of several types of rubber, fillers, and other ingredients which are then mixed in giant blenders known as Banbury mixers. These create a black gummy compound that’ll be sent on for milling.

Mill

When sent in for mill, each mix is then milled with additional heating to soften the batch and mix the chemicals. The batch goes through a mixer again, where more chemicals are added for formation. This is known as the final mix. During these steps, heat and friction are applied to the batch to soften the rubber and evenly distribute the chemicals.

After the mixing is over and the rubber has cooled, it goes through a powerful rolling mill where the rubber is cut into strips that will form the basic structure of your tire. During the milling stage, all the other elements of the tire are also prepared, some of which are then further coated in another type of rubber. Each strip is called a ply of the tire.

Build

The tire itself is constructed, from the inside out. When the beads of a tire are made, wire bundles are wrapped on a wire wrapping machine. The bundles are then formed into rings, and the rings are covered with rubber. The rubber of the tire tread and sidewall are manufactured separately with the help of an extruder. The sidewall rubber is covered with a protective plastic sheet and rolled. Tread rubber is sliced into several strips. They are then loaded into large, flat metal cases. Then all these components are placed in a tire-building machine that ensures every part is in its precise location. This results in what looks like a finished product. This is known as a green tire.

Cure

The green tire is pressed with the help of a large mold, compressing all of the parts of the tire together and giving the tire its final shape. After curing is complete, the tire is removed from the mold for cooling and then tested thoroughly. Each tire is inspected for flaws such as bubbles in the rubber of the tread, sidewall, and interior of the tire. Then, the tire is placed on a test wheel, inflated, and spun. Sensors in the test wheel measure the balance of the tire and determine whether the tire will run in a straight line or not.

As the design and assembly of a modern tire are highly advanced, rarely is one rejected. Once the tire has been inspected and runs on the test wheel, it is passed on to a good tire supplier.

Read More
Tire

Know When It’s Time To Visit The Tire Store To Change Tires

Tires are the least complicated part of your car, yet when anything happens to your tires, you can’t move your car even an inch. So it is necessary that you keep a regular check on your car’s tires so that it is not too late before you to visit the tire store. But how will you decide that it is time to change your car’s tires. Unless and until your tire burst out or it gets punctured, there are no obvious ways to know that the tires need to be changed. Here are some ways on how to find out.

Inspect Your Tires

If it’s been a few couples of years, especially 5 years after you have bought new tires or a new car, it is better to keep a regular check on the tires. You can either do it by yourself or take it to a car or tire service place. They will let you know if your tires need replacement. If not checked within a proper time you might end up stranded somewhere.

Low Tread

Tires that have low or no tread are very dangerous. They are unable to grab the traction on the road. They are more prone to burst than normal tires while you’re driving. Save yourself from such a mess, and keep track of your tire tread. You can keep track by doing a penny test.

Bad Mileage

Many people don’t know that worn-out tires can cost them in mileages. A car that gives 16 kmpl normally you would get 10 kmpl due to worn-out tires. You might not even notice your tires are low on air unless you regularly check them with a gauge.

Tire Bumps

Sometimes your tire might have bulges or bumps in them. In that case, it is more likely that the belt inside them has been broken or become warped. They are not life-threatening in most cases, and many drivers have succeeded in driving thousands of miles on them without any problems. But when you are out on long drives, it is best to not take these risks.

Cracks

As your tires get older and more worn out, they will develop cracks all around. The most obvious places you’ll notice this happening is in the sidewall of the tire. At first, they’ll probably be small cracks which are nothing to be bothered about. But after a while, they’ll stretch and start to cover every surface of the tire. You should replace your tires before it gets that bad and reaches the point where it bursts.

If you notice these conditions, then don’t procrastinate and go to your nearest tire store to change your tire.