Read More
Tires for sales Philippines

4 Myths On Car Maintenance That You Shouldn’t Believe

Our life is filled with so many myths. Without even knowing we tend to believe a lot of things that people say. Similarly, there are some myths regarding car maintenance too. Today, Sailun Tires, a renowned supplier for tires for sale in the Philippines is going to bust some of those myths.

Myth 1: You Need To Change Your Oil Every 3,000 Miles

Earlier it used to be the case when technology wasn’t that advanced and people had to take a lot more care for their car. Nowadays, the new cars that are manufactured are required to change oil every 5000 to 7500 miles. Superior engine design along with better chemical composition and extensive use of synthetic oils have been improved enough which allow a driver to have longer intervals between oil changes.

Myth 2: You Should Replace All Four Tires At The Same Time

There is no hardbound rule that you will have to change all the tires at the same time. You can change any tire whenever it is necessary. Don’t certainly wait for all tires to get worn. If you do that you will have a huge road accident on your hand. On the other hand, if you change the other tires beforehand, it’s just money down the drain. So, whether you buy brand new tire or from tires for sale you can change any of your tires any time you want as long as they are the same size, model, and brand as all the tires.

Myth 3: Wash Your Car With Dish Or Laundry Soap

While this may sound like a nice way to save money, washing your car with dish soap or laundry detergent actually damages the car’s wax finish. Pay a little more for car-wash liquid if you don’t want the car’s paint chipping off and rust marks. The quality of the car-wash liquid prevents the stripping away of the protective wax.

Myth 4: Use Windows Instead Of The Air Conditioner For Better Fuel Economy

Whether you roll down the windows or switch on the AC, neither of them makes any difference toward fuel efficiency. Turning on the air conditioning indeed consumes fuel more quickly but rolling down the windows also increases wind resistance. The car will need to burn slightly more fuel to compensate for its disrupted aerodynamic design.

So, whether you have a new car or second-hand car, new tires or using tires for sale, maintaining them takes some work. But before you do that knowing these myths will certainly make your work easier.

Read More

Common Winter Car And Tire Problems You Need To Be Aware Of

Winter is here and everyone is making different types of preparation. Whether it is in their home or workplace. But one thing you shouldn’t ignore is your car. Your car needs to be checked out too before winter fully sets in. Here are some car and tire problems that you must take care of in the winter.


Even in winter season tire are the first thing you should check out. If needed you can get tires for sale and replace your old tires. If they are worn out tires with lack of tread, it is not suitable to drive them in the winter as you might need more traction during winter. Also, when the temperature drops your car’s tire pressure is going to drop too. So, make sure to check them every other day before you take out your car in the morning.


Car batteries often break down in the winter months. The amperage required to start things up on a warm day is usually cut in half. An under-performing battery may start up with no problems on a summer morning, but may not accomplish that same when temperatures fall. The only viable solution to this particular problem is, of course, preventive maintenance. Batteries need regular servicing, but to avoid injury from battery acid, you may want to let a qualified mechanic do the job. A simple routine check-up may save you from the unpleasant and possibly dangerous situation when your car is stranded in the cold. So, it is always worth getting your battery checked ahead of the winter season so that you are certain it will stand up to the cold season ahead.


Even though the battery gets the most blame when the car will not start at all on a winter morning, the alternator can just as easily break down and cause the car to stall or not start altogether. Also, because alternators charge the battery with the power and energy from the engine, if they break down, then the battery’s charge will dip significantly. This means that your car may fail to start, even if you have got a new battery installed.

Unless and until it snows in the place you live in you don’t need to change your tires in winter. But if it does, try to find winter tires for sale to avoid too much spending. Check all the other problems mentions and get your car serviced at the beginning of the winter.

tires store philippines
Read More
Tires Store

The Step-By-Step Manufacturing Process Of Tires

Tires are the important part of a vehicle. These are the only parts that literally touches the road, and goes over the bumps and potholes on the road. While buying tires from a tires store, have you ever thought how these are made? Or, how the makers ensure that the tires will give us the comfort we want when we ride the vehicles?

The answer might be no. So here, we quench your thirst and provide the step by step process of tire making.

tire store philippines

The Ingredients:

About 200 materials are needed to make a single tire. These ensure the environmental safety, performance, and efficiency of it. However, out of 200, there are main ingredients as they are:

Carbon black and silica, synthetic rubber, natural rubber, several chemicals, metal and textile cables.

The Blend:

30 kinds of rubbers are used to make tires. These are blended into a huge blender, which forms a black gummy substance. The colour black is for the carbon black. After the blending, it’s sent to the mill.

The Mill:

In here the hot melted rubber is cooled and is cut into the shape of the tires. Here some other parts are also separated from it, these are later coated with a different type of rubber.

The Build:

After the blending and milling, it’s time to build the tire. Tread, steel belts, ply, beads with other ingredients are finally placed in a tire builder. The colour it shows is green.

The Cure:

In a curing machine, these tires are vulcanized. It compresses all the parts together to give it the final shape. It also includes the manufacturer’s markings and tread pattern.

Final Touch:

Tire experts then check the tires for any fault or blemish in them, and after the test is done, it gets packed and becomes ready for shipping. The experts check the tires thoroughly to avoid any mistakes. Because one mistake can become fatal.

Tires ensure a safe ride in vehicles. That’s why it’s always important to buy the best tires from tires store.

tires store philippines